Latest Posts

Q Mobile X4 pro flash file cm2 read 100% tested

Q Mobile X4 pro flash file cm2 read 100% tested

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert-back
2. Insert USB cable. In some cases require hold Boot-Key ( ‘*’ )

Wait for phone…
Phone found! [ 37 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EF257BD699AF1B3E70DCF67B6B45B988
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : FLYCOM61D_11C_M855C_PCB01_gprs_MT6261_S00.QMOBILE_X4_PRO_V12_20170316.bin
FileVersion : QMobile_X4_Pro_V12_20170316

[ScatCFG] : MT6261 / QMobile_X4_Pro_V12_20170316 / NOR , SF
Firmware saved to : c:\users\ranaa\one/drive\desktop\infinity/box\cm2mtk\Read_out\FLYCOM61D_11C_M855C_PCB01_gprs_MT6261_S00\

Done!

This Web Page, You Will Find The Official Firmware Link To Download Q Mobile x4 pro 6531EFM Stock File Firmware ROM (Flashing File) On Your PC.I Upload Firmware in Zip File First Download Zip Extractor Link Here Click to Download Flash Tool CM2 SCR,SCR USB Drivers, How to flash Manual.

 

[File-Name] : Qmobile x4 pro
[File-Size] : 4MB
[Flash-Tool] :(CM2 MTK) – (CM2 MTK lunex)
How To Flash Manual[install]:Follow Tutorial

How To Flash Or Install Firmware [ROM]

1. Download and Extract The Q Mobile x4 pro Stock file On Your Computer.
2. After Extracting File, You Will to get the firmware File, Flash Tool Drivers And How To Flash Manual.
3. Install The Provide USB DRIVERS On Your Computer [If The USB Drivers is Already Installed Then Skip This Step]
4. Follow The Flash Manual To Flash or Install the Firmware On Your Q x4 pro Device.
Follow CM2 MTK Guidelines

Note:

First All Data Backup Safely otherwise Your All Data Will Be Deleted

Download

1 thought on “Q Mobile X4 pro flash file cm2 read 100% tested”

Leave a Comment